• Work

WK-3414

Multifunctional high visibility safety boot, lightweight and breathable.

CERTIFICATION
,
CERTIFICATION
,
,

EN ISO 20345:2022 S7S
HRO HI CI FO LG SR

COLOUR
black/orange
HEIGHT
13 cm
MODEL
B
UPPER
suede split leather, 1.6/1.8 mm, water-repellent / high-tenacity fabric
LINING
2-layers laminate with three-dimensional fabric
MEMBRANE
100% PU + 100% PL, laminated directly to upper
SOLE
injected, PU with rubber tread, resistant to heat, oil and hydrocarbons. Anti-static.
SIZES
EU 35 - 50
WEIGHT
abt 700 g. (one shoe size EU 42)
Multifunctional safety work boot, with large fabrics inserts. Extremely lightweight and comfortable. The membrane, laminated directly to the upper, guarantees waterproofing and protects against the penetration of blood-borne pathogens. Antistatic footwear.
TECHNICAL DATA SHEET
INFORMATION NOTE
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,

Request information

For more information or to request clarification, please fill out the form below. You will be contacted as soon as possible.

Zipper

Zip fastening system.

Zipper +

Quick zip fastening system, and following initial closure by lacing that allows the footwear to adapt perfectly to the foot.

Perfect Fit Adjust

A system for adjusting the fit, by means of removable and interchangeable insoles, according to requirements.

Waterproof

Fully waterproof footwear, made with materials that resist the penetration of water and with a laminated membrane on the inside of the upper.

Two zone Lacing

Two zone lacing that provides greater precision in adapting the footwear to the foot and ankle.

Sun Protection

Footwear made with materials having reflective properties to prevent the absorption of the sun’s rays and hence to reduce heat inside the boot.

Steel Toecup

The steel toe cap is certified conforming to EN ISO 22568 standard, to withstand impact up to 200 Joules. Although heavier than toe caps in composite or aluminium, the steel toe cap is favoured for its strength.

SRC Slip Resistant

Sole with SRC anti-slip properties conforming to 20344:2021 standard. Designed to reduce the risk of slipping to the minimum.

SR Slip Resistant

Sole with SR anti-slip properties conforming to 20344:2021 standard, tested on ceramic with glycerol. Designed to reduce the risk of slipping to the minimum.

Soft Collar

A soft and padded collar for extra comfort when walking.

Slip Out System

A rubber protection, protruding from the back of the footwear, to aid effortless removal and to prevent the risk of damage.

Rubber Outsole

Sole made entirely in rubber resistant to oil, fuel and contact heat up to 300°C. The special structure provides excellent energy absorption at the heel.

Rubber Band

Footwear that incorporates a rubber band to provide 360° protection for the lower part of the upper.

RFID Pocket

Footwear with an RFID chip pocket.

PU-Rubber Outsole

Bi-density sole with polyurethane midsole and rubber tread, resistant to oil, fuel and contact heat up to 300°C, with energy-absorbing heels.

PU Outsole

Sole made entirely in polyurethane, fuel and oil resistant, with energy-absorbing heels.

PS Anti-perforation

The footwear is protected against perforation, conforming to EN 22568 standard, with a textile insert, resistant to nails 3mm in diameter.

PL Anti-Perforation

The footwear is protected against perforation, conforming to EN 22568 standard, with a textile insert, resistant to nails 4.5mm in diameter.

Overcup Protection

Extra reinforcement and protection over the toe cap on the outside of the upper.

Orthopedic DGUV Insole

Footwear that complies with the use of personalised orthopaedic insoles, conforming to DGUV 112-191 standard.

Metatarsal Protection

Metatarsal protection to safeguard the top of the foot from possible impact, conforming to EN 22568-1 standard.

Metal Free

Footwear with no metal components.

Metal Anti-Perforation

The footwear is protected against perforation, conforming to EN 22568 standard, with a metal plate insert.

Ventilation Lining

Footwear made with a lining in 3D technical material that promotes the flow of air towards the outside and towards the top collar when walking.

Light

Footwear designed and manufactured to keep the weight to the minimum and ensure maximum comfort.

Leather Outsole

Sole made entirely in natural leather.

Ladder Grip

A sole designed conforming to the supplementary requirements of 20344:2021 standard to guarantee maximum grip and safety on ladders with rungs.

Laces Pocket

A lace pocket that prevents tangling and guarantees greater protection and comfort during use.

HRO

Footwear with a heat resistant rubber sole resistant to contact heat up to 300°C.

Honey Comb

The inside of the heel of the rubber sole has a honeycomb construction to make the shoe lighter, guaranteeing insulation from heat and cold.

High Visibility

Reflective high-vis inserts built into the footwear.

High Temp. Resistant

Greater protection and insulation from heat of the footwear for firefighters.

High Breathability

Footwear designed and developed with highly breathable materials for both the upper and the inner lining. A laminated membrane directly on the upper to considerably aid transpiration.

Heel Protection

Reinforcement and extra protection of the heel counter, on the outside of the upper.

Heat Insulation

Footwear insulated against heat.

Gear Shift Protection

Reinforcement and extra shift pad protection for motorcyclists.

Flex System

A system with flexible padding on the outside of the footwear, designed to ensure correct flexing and allowing movement in a natural and comfortable way, to adapt to the different movement needs during work activities.

Auto Adjustment Fitting

A system for keeping the foot in the correct position inside the footwear and to prevent slipping off.

Fire Resistant

Certified footwear for firefighters conforming to standard EN 15090, made entirely with flame-retardant materials.

Fast Unlacing

A quick unlacing system with quick release hooks.

Fast Lacing

A quick lacing system with a device for locking and quick release of the lace.

ESD

ESD and anti-static footwear, conforming to EN 61340 standard.

Elastic Band

An elastic insert in the collar at the back of the upper, which allows the boots to adapt to the shape of the calf.

Cut Resistance

The footwear is resistant to cutting or lacerations caused by pointed or sharp objects. This resistance is obtained by the use of reinforced material, specific hides, aramid fibres or cut-resistant textiles.

Composite Toecup

The toe cap in composite material is extremely light, weighing almost half that of a steel one. Despite its light weight, it offers impact resistance up to 200 Joules, conforming to EN ISO 22568 standard.

Comfort Toe Lacing

Extended lacing on the apron of the upper that provides greater comfort when walking.

Cold Insulation

Footwear insulated against cold.

Chain Saw

Footwear resistant to chain saw cutting conforming to EN ISO 17249:2013 standard. The textile used brings the saw to an immediate halt due to the build-up of threads and fibres in the links of the chainsaw.

Back Lacing

Back lacing offering excellent adjustment in the calf area.

Self-cleaning Outsole

Sole with a self-cleaning design that prevents the build-up of dirt.

Anatomic Shape

Footwear designed and developed with specific anatomic shapes for every product category and therefore type of use.

Ankle Protection

Ankle protection against impact, conforming to EN 20344:2021 standard.

Ankle Protection

Ankle protection against impact, conforming to EN 20344:2021 standard.

Energy Absorber

Energy absorption at the heel means the footwear reduces the impact on it, creating less stress on the joints and improving comfort, thereby lowering the risk of fatigue.

Aluminium Toecup

The aluminium toe cap conforms to EN ISO 22568 standard, providing toe protection up to 200 Joules. This material is 40% lighter than steel and reduces the overall weight of the footwear, increasing comfort without compromising safety.